# Lock, unlock and force-stop a machine

> Lock a machine in the MonsoonOS admin so nobody can start it, unlock it again, and use Force Stop or Emergency Stop when a wash keeps running.

- Part of: MonsoonOS Guide › Locations, machines and Stormboxes
- Available on every MonsoonOS plan: Full Wash Platform and Rain Pay Terminals Only.
- Who can do this: On Full Wash, anyone whose role includes "Set up machines" (Owner by default). On Terminals Only, your admin login.
- Last updated: 2026-11-13
- Web page: https://www.cactuswashsystems.com/guide/lock-unlock-and-force-stop

Three controls stop a machine from being used, and each is for a different job:

| Control | Use it when | Where |
| --- | --- | --- |
| **Lock** | A machine should not be used for a while, such as for cleaning or a repair. | **Machines** page |
| **Force Stop** | A bay keeps running after MonsoonOS shows the session has ended. | The machine's **Configure Stormbox** page, or **Bays** (Full Wash Platform) |
| **Emergency Stop** | A team member needs to stop a customer's running wash (Full Wash Platform). | **Bays** page |

## Lock a machine

A locked machine cannot be started. Rain Pay terminals show it as unavailable, and so does the MonsoonOS app on the Full Wash Platform. Locking does not stop a wash that is already running.

1. Go to **Operations › Machines**. With several locations, choose one from **Location** at the top of the page to see only its machines.
2. On the machine's row, select **Lock**.

The machine's status changes to **Locked**. To put it back in use, select **Unlock** on the same row. The status changes back to **Available**.

### Machine statuses

| Status | What it means |
| --- | --- |
| **Available** | In service and unlocked. |
| **Locked** | Locked by your team. Select **Unlock** to put it back in use. |
| **Out of service** | **Stormbox Enabled** is off on the machine's **Configure Stormbox** page. See [Bring a Stormbox online](https://www.cactuswashsystems.com/guide/bring-a-stormbox-online). |

![The Machines page listing four self-serve bays and an in-bay automatic, each marked Available, with Configure, Lock and delete buttons on every row](https://www.cactuswashsystems.com/guide/img/machines/machines-table.webp)

## Force Stop a bay that keeps running

Force Stop is for a bay that is still running even though MonsoonOS shows its session has ended. It tells the Stormbox to stop the bay whether or not MonsoonOS thinks a session is running, and clears any session stuck waiting to stop. It does not lock the bay. Your role needs **Force-stop a wash**.

### From the machine's setup page

1. On the **Machines** page, select **Configure** on the bay's row.
2. Find **Bay Recovery**.
3. Select **Force Stop**.
4. Confirm.

**Stop pulse confirmed** appears when the Stormbox has stopped the bay.

### From the Bays page (Full Wash Platform)

This is the way in for team members whose role does not include **See machine setup**.

1. Select **Bays** in the top bar of the admin.
2. On the bay's card, select **Force Stop**. A bay with a wash running shows **Emergency Stop** instead.
3. Confirm.

A message at the top of **Bays** says when the bay has confirmed the stop.

Force Stop is not offered on:

- **In-bay automatics.** Once a wash starts, the in-bay automatic runs its own cycle.
- **Count-down bays.** The bay's own timer ends the wash when the paid time runs out. **Bay Recovery** says so, and to end a wash early you use the bay's physical stop.

**Force Stop** is greyed out while **Stormbox Enabled** is off.

## Emergency Stop (Full Wash Platform)

On the Full Wash Platform, team members whose role includes **Run machines** can stop a customer's running wash from the **Bays** page. Open it with **Bays** in the top bar of the admin, or the **Bays** tab of the MonsoonOS app.

1. Find the running machine on **Bays**.
2. Select **Emergency Stop**.

The machine stops. On **Bays** it then shows **Temp. Locked** for the number of seconds set in **Emergency Stop Lockout** on its **Configure Stormbox** page (10 seconds unless you change it). A Wash On Demand customer is not charged for that wash, and a Wash Club member gets back what the start used.

**Emergency Stop** is not offered on in-bay automatics or count-down bays, for the same reasons as Force Stop.

Rain Pay Terminals Only does not include the **Bays** page.

> **If there is no Lock button:** Your role does not include **Set up machines**. Ask your owner.

> **If you do not see Bay Recovery:** Your role needs **Force-stop a wash**, and **See machine setup** to open the **Configure Stormbox** page. Without **See machine setup**, use **Force Stop** on **Bays** instead. Bay Recovery is also hidden on in-bay automatics.

> **If Force Stop says the Stormbox did not confirm the stop:** The Stormbox may be offline or without power. Check the bay, then see [A machine or Stormbox is offline](https://www.cactuswashsystems.com/guide/machine-or-stormbox-offline). If the bay is still running, use its physical stop.

> **If customers say a machine will not start:** Check its status on the **Machines** page first. If it shows **Available**, check its Stormbox: see [A machine or Stormbox is offline](https://www.cactuswashsystems.com/guide/machine-or-stormbox-offline).
