# Set up a count-down bay

> Set up a self-service bay whose own coin timer counts the wash down, such as a B&C TM5-CJX or a Dixmor LED6, LED7 or LED9, so the time customers buy in the MonsoonOS app or at the terminal loads onto the timer.

- Part of: MonsoonOS Guide › Locations, machines and Stormboxes
- Available on every MonsoonOS plan: Full Wash Platform and Rain Pay Terminals Only.
- You need a Stormbox.
- Who can do this: On Full Wash, anyone whose role includes "Set up machines" (Owner by default). On Terminals Only, your admin login.
- Last updated: 2026-11-18
- Web page: https://www.cactuswashsystems.com/guide/set-up-a-count-down-bay

A count-down bay has its own coin timer that counts the wash down and turns it off. The customer buys a block of time, such as 10 minutes for $10.00, in the MonsoonOS app or at the bay's Rain Pay Experience terminal. MonsoonOS sends the paid time to the timer as coin pulses, one quarter of what the customer paid in each pulse, and the timer counts down and ends the wash by itself. Time a customer adds is paid for and loaded the same way, and the timer shows the money the customer paid. When a wash bought in the app ends, MonsoonOS emails the customer a receipt.

There is no Stop button on a count-down bay: the timer ends the wash when the time runs out. To end one early, use the bay's own stop; [Lock, unlock and force-stop a machine](https://www.cactuswashsystems.com/guide/lock-unlock-and-force-stop) explains why MonsoonOS cannot stop it. On Rain Pay Terminals Only there is no customer app, so customers buy and add time at the terminal.

## Before you start

- The bay added in **Machines**, with its Stormbox online. See [Bring a Stormbox online](https://www.cactuswashsystems.com/guide/bring-a-stormbox-online).
- The Stormbox wired to the timer by your installer. The **Configure Stormbox** page shows how for each timer it lists.
- The timer's keypad within reach.
- Your prices: the block's minutes and price, and the time customers can add.

## Set the prices

1. Go to **Pricing › Self-Service Bay Settings**. With several locations, choose the location from **Location** at the top of the page.
2. Under **Timer mode**, choose **Count-down**. Every self-service bay at the location uses it.
3. Enter **Block time (minutes)** and **Block price ($)**: the block a customer buys to start, such as 10 minutes for $10.00.
4. Under **Add-time options**, select **+ Add an option** for each amount of time customers can add, and enter its **Add minutes** and **Price ($)**.
5. Enter **Maximum time (minutes)**: the longest one wash can run, the block and added time together. **Max spend ($)** is worked out for you.
6. Select **Save settings**.

Keep the prices in step with the timers:

- Make the block price and every add-time option's price a multiple of $0.25. The timer counts each pulse as a quarter.
- Give every add-time option the same price per minute, such as 2 minutes for $1.00 and 4 minutes for $2.00. The timer adds time after the start at one rate. That rate can differ from the block's.
- On a Dixmor timer, the block's time must divide evenly among its quarters: 10 minutes for $10.00 is 40 quarters of 15 seconds each.

Once a bay's timer is chosen, **Bay timers** on the same page checks the prices as you type. If a price does not fit, it says what to change and suggests a price that works, and the page saves nothing until every price fits. When you save new prices later, the page lists the timer settings they change under **Now set the bay timers to match**. Key those into each timer, because MonsoonOS cannot change a timer's own settings. The timer mode cannot change while a wash is running at the location; save again once it has ended. Changing prices needs **Edit machine prices** in your role. For what every field on the page does, see [Set self-service bay pricing](https://www.cactuswashsystems.com/guide/self-service-bay-pricing).

## Choose the timer on the Configure Stormbox page

You or your installer can do this part.

1. Go to **Operations › Machines**. On the bay's row, select **Configure**.
2. Scroll to **Timer and wiring**. Its first line names the location's timer mode.
3. Under **Timer**, choose the bay's timer.
4. In **Stormbox relay**, enter the relay your installer wired to the timer.
5. Check the wiring the page shows against the bay.
6. Select **Save Configuration**.

**What MonsoonOS set for you** lists what the timer and relay decided, so there is nothing else to fill in. Saving also sets how long the Stormbox closes the relay for each pulse; the message at the bottom right says when that is done, or that MonsoonOS support will finish it.

**Set the timer to match** lists every setting on the timer and what to set it to, worked out from the bay's prices. Bold values differ from the timer's factory setting. Keep the page open while you program the timer. Whenever you change the bay's prices, open the page again and key the new values into the timer.

The page warns you when another bay on the same Stormbox has a timer that needs different wiring. Those timers cannot share one Stormbox.

## Program the B&C TM5-CJX

The timer's settings open only while it is idle, with no wash running. Hold any button on its keypad for 3 to 4 seconds to open them. **Down** and **Up** move between settings, **Enter** edits the one shown, and **Back** finishes it.

Set each setting to its value in **Set the timer to match**: **Nationality**, **Money to Start**, **Time to Start**, **Bonus Time** and **Credit Card Enable**. When every setting is right, go to **Exit/Save** and press **Enter**. The timer drops your changes if you leave any other way.

To keep the idle screen from showing the start price, set **Greeting** to **Custom** with your own message.

> **Note:** A wash your team starts, or a Wash Club or free wash, that is shorter than the block still loads the whole block. The timer only starts once it has its Money to Start.

## Program a Dixmor LED6, LED7 or LED9

Program the timer while it is idle. On an LED6 or LED7, **MODE** moves to the next item and **SET** changes it; hold **SET** to count down. On an LED9, use **S2** to move and **S1** to change.

Go through every item in **Set the timer to match**, in order, and set each one. The values that matter most:

- **COIN VALU** is $0.25, one quarter a pulse.
- **C:** is the time each quarter of the block adds, and **S** is the quarters it takes to start.
- **B** is the first quarter after the block, **MULTIPLE BONUS** is on, and **BONUS TIME** is the time each added quarter adds. Bonus time replaces the coin's time after the start, so added time can cost less per minute than the block.
- **INSTANT START**, so the wash starts on the last quarter of the block.
- **RESTART OFF** stays off, so one pulse cannot restart a finished wash.

On an LED9, also set item 26 to **CC Y**.

## Let the Stormbox count out the pulses

On a Stormbox that runs the count-down script, MonsoonOS sends one command for each sale and the Stormbox pulses the timer itself, so a slow or cellular connection cannot merge or drop a pulse. You do not tick anything: **What MonsoonOS set for you** on the **Configure Stormbox** page says which way each bay works.

- **The Stormbox counts out the pulses**: the bay already works this way.
- **Separate pulses: this Stormbox is not running the count-down script yet**: select **Save Configuration**. MonsoonOS installs the script on the Stormbox in about half a minute, and the bay switches over by itself. It also installs it when you switch a location to count-down on Pricing. If the Stormbox is busy or offline, MonsoonOS tries again by itself once it is free.

A four-relay Stormbox counts out pulses on relays 1, 2, 3 and 4, for up to four count-down bays; a one-relay Stormbox on relay 1.

A $10.00 start takes about 25 seconds to load onto the timer. Until it has loaded, a customer who adds time waits a few seconds, or is asked to try again shortly. The app shows **Adding time onto the bay timer…** while added time loads, and the terminal shows **Loading your time onto the bay timer…** until the time is loaded.

## Test the bay before you open it

1. Make sure the bay is clear and the timer is idle.
2. Buy one block as a customer would: in the MonsoonOS app, or at the bay's terminal. The app shows **Loading your time…** while the time loads.
3. Within about half a minute, check that the timer shows the block, such as 10:00, and the wash runs.
4. Add time once with a button such as **+2 min**, in the app or under **Add time** on the terminal. Check that the timer adds exactly those minutes and shows what the customer paid.
5. If you started in the app and the bay has a terminal, buy one block at the terminal too.

To get your test charges back, see [Refund a charge](https://www.cactuswashsystems.com/guide/refund-a-charge).

> **If the timer shows the wrong time after a start:** Check every item on the timer against **Set the timer to match**, save, and test again. On a Dixmor, a **C:** left at its factory 0:30 loads twice the time.

> **If added time is wrong on a B&C TM5-CJX:** Check **Bonus Time** against the box. If an add-on adds a quarter of the time it should, the timer is counting Bonus Time per dollar: set it to four times the value in the box (2:00 instead of 0:30), save and test again.

> **If a Dixmor shows VERIFYING CARD or starts counting up instead of counting a coin:** The Stormbox is closing the relay for too long. Open the **Configure Stormbox** page and select **Save Configuration** again. If the message at the bottom right says MonsoonOS support will finish it, email support@cactuswashsystems.com.

> **If the timer shows nothing after a start:** Check that the Stormbox is online; see [A machine or Stormbox is offline](https://www.cactuswashsystems.com/guide/machine-or-stormbox-offline). Otherwise ask your installer to check the timer's wire against the wiring on the **Configure Stormbox** page.

> **If the page says these prices do not fit the timer:** Read each line under it. Change the prices on **Self-Service Bay Settings** to suit, save, then program the timer to the new values.

> **If the page says the timer has no count-down setup:** Choose another timer, or choose **Count-down** under **Timer mode** on **Self-Service Bay Settings** and save.

> **If your timer is not listed:** Choose **Other timer (set up by hand)** under **Timer** and fill in the fields that appear, or email support@cactuswashsystems.com with the timer's make and model.

## Next

[Pair an Experience terminal](https://www.cactuswashsystems.com/guide/pair-an-experience-terminal) for the bay, if it has one.
