# Screen lock

> The screen lock keeps customers inside the MonsoonOS app on a Rain Pay Experience terminal; this explains each screen lock state and when to turn it off.

- Part of: MonsoonOS Guide › Rain Pay terminals
- Available on every MonsoonOS plan: Full Wash Platform and Rain Pay Terminals Only.
- You need a Rain Pay Experience terminal (shown in the admin as a Wash terminal).
- Who can do this: On Full Wash, anyone whose role includes "Pair card terminals and kiosks" (Owner by default). On Terminals Only, your admin login.
- Last updated: 2026-11-12
- Web page: https://www.cactuswashsystems.com/guide/terminal-screen-lock

The screen lock keeps a Rain Pay Experience terminal on the MonsoonOS kiosk app, so a customer cannot leave it for the terminal's settings or other apps. It is on for every terminal from the moment it is paired.

## See each terminal's lock

On the **Terminals** page, the **Screen lock** column shows a label for each terminal:

| Label | What it means |
| --- | --- |
| **Locked** | The terminal is locked to the kiosk app. This is what you want. |
| **Unlocked for service** | Someone entered the kiosk service PIN on the terminal. It locks again on its own after 30 minutes. |
| **Unlocked** | The terminal reports it is not locked. |
| **Switched off** | You turned the screen lock off for this terminal. |
| **Not reported yet** | The terminal has not told MonsoonOS its lock state yet, usually because it was just paired or is offline. |
| **Not available on this model** | This terminal model does not support the screen lock. |
| **Lock refused by the terminal** or **Lock failed** | The terminal could not lock itself. |

## Turn the screen lock off or on

You only need this for work on the terminal that takes longer than a service unlock, such as a technician visit.

1. On the **Terminals** page, find the terminal.
2. In the **Screen lock** column, select the switch.
3. When you turn it off, confirm **Turn the screen lock off? Customers will be able to leave the app until you turn it back on.**
4. When the work is done, select the switch again to turn the lock back on.

> **Note:** For a quick look at the terminal's Wi-Fi or settings, use the kiosk service PIN instead. It unlocks one terminal for 30 minutes and locks again by itself. See [Kiosk service PIN](https://www.cactuswashsystems.com/guide/kiosk-service-pin).

> **If a terminal shows Unlocked, Lock refused by the terminal or Lock failed:** Restart the terminal. If the label does not change to **Locked** within a few minutes of it coming back, email support@cactuswashsystems.com with the terminal's serial number.
