A machine or Stormbox is offline

What to check, in order, when a MonsoonOS machine or its Stormbox shows offline, from power and the site's internet to the Stormbox's Wi-Fi, before you contact support.

Every planStormbox
Plans
Available on every MonsoonOS plan: Full Wash Platform and Rain Pay Terminals Only.
Needs
You need a Stormbox.
Who can do this:
On Full Wash, anyone whose role includes "See machine setup" (Owner by default). On Terminals Only, your admin login.

When a Stormbox stops reporting, MonsoonOS cannot start the machines it runs. Rain Pay terminals show those machines as unavailable until the Stormbox is back, and your team gets a machine alert email. Most outages come down to power or the site's internet. Work through the checks below in order.

Leave the inside of the Stormbox and its wiring to your installer.

Find the Stormbox's status

  1. Go to Operations › Machines. With several locations, choose one from Location at the top of the page to see only its machines.
  2. On the machine's row, select Configure.
  3. Read the status under Stormbox Link.
What you see What it means
ONLINE The Stormbox is reporting normally.
ONLINE with On cellular backup The site's Wi-Fi is not working and the Stormbox is using its cellular backup. It is still online. Fix the Wi-Fi when you can.
OFFLINE The Stormbox has not reported for more than 10 minutes. Last contact shows when it last did.
CLAIMED The Stormbox is claimed but has never connected.

The Wi-Fi card on the same page shows the same thing in words: Online, Running on cellular backup, or Offline since a date and time. If your Machines page has a Stormboxes list at the bottom, it shows each Stormbox as Online, On cellular or Offline. On a location's Machines page it lists that location's Stormboxes.

Check these, in order

  1. Power. Check that the machine has power and that its breaker is on. A Stormbox goes offline when its power is off.
  2. The site's internet. Check that the router or modem is on, and that a phone can connect to the site's Wi-Fi and open a web page. If the internet is down, restart the router.
  3. A changed Wi-Fi network. If you replaced the router or changed the Wi-Fi name or password, the Stormbox cannot join until you give it the new details. If it has a cellular backup, it comes online over cellular, and you can set the new network in the Wi-Fi card. See Bring a Stormbox online.
  4. A Wi-Fi change in progress. After Restart and join, a Stormbox is offline for about 2 to 5 minutes. Wait, then reload the page.
  5. Test Connection. On the Configure Stormbox page, select Test Connection. It checks the MonsoonOS side, not your site. If it says MonsoonOS is ready to send commands to this Stormbox, that side is fine, and Last contact shows when the Stormbox itself last reported. If it says MonsoonOS could not open its connection to this Stormbox, try again in a minute, and email support if it keeps failing.

If the Stormbox is online but customers still cannot start the machine

Check the machine's status on the Machines page:

  • Locked: select Unlock. See Lock, unlock and force-stop a machine.
  • Out of service: Stormbox Enabled is off. Turn it on and select Save Configuration on the Configure Stormbox page.
  • Temp. Locked on the Bays page (Full Wash Platform): a team member just used Emergency Stop. It clears by itself after the lockout time.

Also check that the machine has a price at its location. See Set self-service bay pricing and the pages for your other machines.

Contact support

If the Stormbox is still offline after these checks, email support@cactuswashsystems.com. Include the machine's name, the Stormbox serial number shown under Stormbox Link, and what you have already checked.