Set up a count-down bay

Set up a self-service bay whose own coin timer counts the wash down, such as a B&C TM5-CJX or a Dixmor LED6, LED7 or LED9, so the time customers buy in the MonsoonOS app or at the terminal loads onto the timer.

Every planStormbox
Plans
Available on every MonsoonOS plan: Full Wash Platform and Rain Pay Terminals Only.
Needs
You need a Stormbox.
Who can do this:
On Full Wash, anyone whose role includes "Set up machines" (Owner by default). On Terminals Only, your admin login.

A count-down bay has its own coin timer that counts the wash down and turns it off. The customer buys a block of time, such as 10 minutes for $10.00, in the MonsoonOS app or at the bay's Rain Pay Experience terminal. MonsoonOS sends the paid time to the timer as coin pulses, one quarter of what the customer paid in each pulse, and the timer counts down and ends the wash by itself. Time a customer adds is paid for and loaded the same way, and the timer shows the money the customer paid. When a wash bought in the app ends, MonsoonOS emails the customer a receipt.

There is no Stop button on a count-down bay: the timer ends the wash when the time runs out. To end one early, use the bay's own stop; Lock, unlock and force-stop a machine explains why MonsoonOS cannot stop it. On Rain Pay Terminals Only there is no customer app, so customers buy and add time at the terminal.

Before you start

  • The bay added in Machines, with its Stormbox online. See Bring a Stormbox online.
  • The Stormbox wired to the timer by your installer. The Configure Stormbox page shows how for each timer it lists.
  • The timer's keypad within reach.
  • Your prices: the block's minutes and price, and the time customers can add.

Set the prices

  1. Go to Pricing › Self-Service Bay Settings. With several locations, choose the location from Location at the top of the page.
  2. Under Timer mode, choose Count-down. Every self-service bay at the location uses it.
  3. Enter Block time (minutes) and Block price ($): the block a customer buys to start, such as 10 minutes for $10.00.
  4. Under Add-time options, select + Add an option for each amount of time customers can add, and enter its Add minutes and Price ($).
  5. Enter Maximum time (minutes): the longest one wash can run, the block and added time together. Max spend ($) is worked out for you.
  6. Select Save settings.

Keep the prices in step with the timers:

  • Make the block price and every add-time option's price a multiple of $0.25. The timer counts each pulse as a quarter.
  • Give every add-time option the same price per minute, such as 2 minutes for $1.00 and 4 minutes for $2.00. The timer adds time after the start at one rate. That rate can differ from the block's.
  • On a Dixmor timer, the block's time must divide evenly among its quarters: 10 minutes for $10.00 is 40 quarters of 15 seconds each.

Once a bay's timer is chosen, Bay timers on the same page checks the prices as you type. If a price does not fit, it says what to change and suggests a price that works, and the page saves nothing until every price fits. When you save new prices later, the page lists the timer settings they change under Now set the bay timers to match. Key those into each timer, because MonsoonOS cannot change a timer's own settings. The timer mode cannot change while a wash is running at the location; save again once it has ended. Changing prices needs Edit machine prices in your role. For what every field on the page does, see Set self-service bay pricing.

Choose the timer on the Configure Stormbox page

You or your installer can do this part.

  1. Go to Operations › Machines. On the bay's row, select Configure.
  2. Scroll to Timer and wiring. Its first line names the location's timer mode.
  3. Under Timer, choose the bay's timer.
  4. In Stormbox relay, enter the relay your installer wired to the timer.
  5. Check the wiring the page shows against the bay.
  6. Select Save Configuration.

What MonsoonOS set for you lists what the timer and relay decided, so there is nothing else to fill in. Saving also sets how long the Stormbox closes the relay for each pulse; the message at the bottom right says when that is done, or that MonsoonOS support will finish it.

Set the timer to match lists every setting on the timer and what to set it to, worked out from the bay's prices. Bold values differ from the timer's factory setting. Keep the page open while you program the timer. Whenever you change the bay's prices, open the page again and key the new values into the timer.

The page warns you when another bay on the same Stormbox has a timer that needs different wiring. Those timers cannot share one Stormbox.

Program the B&C TM5-CJX

The timer's settings open only while it is idle, with no wash running. Hold any button on its keypad for 3 to 4 seconds to open them. Down and Up move between settings, Enter edits the one shown, and Back finishes it.

Set each setting to its value in Set the timer to match: Nationality, Money to Start, Time to Start, Bonus Time and Credit Card Enable. When every setting is right, go to Exit/Save and press Enter. The timer drops your changes if you leave any other way.

To keep the idle screen from showing the start price, set Greeting to Custom with your own message.

Program a Dixmor LED6, LED7 or LED9

Program the timer while it is idle. On an LED6 or LED7, MODE moves to the next item and SET changes it; hold SET to count down. On an LED9, use S2 to move and S1 to change.

Go through every item in Set the timer to match, in order, and set each one. The values that matter most:

  • COIN VALU is $0.25, one quarter a pulse.
  • C: is the time each quarter of the block adds, and S is the quarters it takes to start.
  • B is the first quarter after the block, MULTIPLE BONUS is on, and BONUS TIME is the time each added quarter adds. Bonus time replaces the coin's time after the start, so added time can cost less per minute than the block.
  • INSTANT START, so the wash starts on the last quarter of the block.
  • RESTART OFF stays off, so one pulse cannot restart a finished wash.

On an LED9, also set item 26 to CC Y.

Let the Stormbox count out the pulses

On a Stormbox that runs the count-down script, MonsoonOS sends one command for each sale and the Stormbox pulses the timer itself, so a slow or cellular connection cannot merge or drop a pulse. You do not tick anything: What MonsoonOS set for you on the Configure Stormbox page says which way each bay works.

  • The Stormbox counts out the pulses: the bay already works this way.
  • Separate pulses: this Stormbox is not running the count-down script yet: select Save Configuration. MonsoonOS installs the script on the Stormbox in about half a minute, and the bay switches over by itself. It also installs it when you switch a location to count-down on Pricing. If the Stormbox is busy or offline, MonsoonOS tries again by itself once it is free.

A four-relay Stormbox counts out pulses on relays 1, 2, 3 and 4, for up to four count-down bays; a one-relay Stormbox on relay 1.

A $10.00 start takes about 25 seconds to load onto the timer. Until it has loaded, a customer who adds time waits a few seconds, or is asked to try again shortly. The app shows Adding time onto the bay timer… while added time loads, and the terminal shows Loading your time onto the bay timer… until the time is loaded.

Test the bay before you open it

  1. Make sure the bay is clear and the timer is idle.
  2. Buy one block as a customer would: in the MonsoonOS app, or at the bay's terminal. The app shows Loading your time… while the time loads.
  3. Within about half a minute, check that the timer shows the block, such as 10:00, and the wash runs.
  4. Add time once with a button such as +2 min, in the app or under Add time on the terminal. Check that the timer adds exactly those minutes and shows what the customer paid.
  5. If you started in the app and the bay has a terminal, buy one block at the terminal too.

To get your test charges back, see Refund a charge.

Next

Pair an Experience terminal for the bay, if it has one.