Screen lock

The screen lock keeps customers inside the MonsoonOS app on a Rain Pay Experience terminal; this explains each screen lock state and when to turn it off.

Every planExperience terminal
Plans
Available on every MonsoonOS plan: Full Wash Platform and Rain Pay Terminals Only.
Needs
You need a Rain Pay Experience terminal (shown in the admin as a Wash terminal).
Who can do this:
On Full Wash, anyone whose role includes "Pair card terminals and kiosks" (Owner by default). On Terminals Only, your admin login.

The screen lock keeps a Rain Pay Experience terminal on the MonsoonOS kiosk app, so a customer cannot leave it for the terminal's settings or other apps. It is on for every terminal from the moment it is paired.

See each terminal's lock

On the Terminals page, the Screen lock column shows a label for each terminal:

Label What it means
Locked The terminal is locked to the kiosk app. This is what you want.
Unlocked for service Someone entered the kiosk service PIN on the terminal. It locks again on its own after 30 minutes.
Unlocked The terminal reports it is not locked.
Switched off You turned the screen lock off for this terminal.
Not reported yet The terminal has not told MonsoonOS its lock state yet, usually because it was just paired or is offline.
Not available on this model This terminal model does not support the screen lock.
Lock refused by the terminal or Lock failed The terminal could not lock itself.

Turn the screen lock off or on

You only need this for work on the terminal that takes longer than a service unlock, such as a technician visit.

  1. On the Terminals page, find the terminal.
  2. In the Screen lock column, select the switch.
  3. When you turn it off, confirm Turn the screen lock off? Customers will be able to leave the app until you turn it back on.
  4. When the work is done, select the switch again to turn the lock back on.